Monkeying around systems, scratching my needs

Freebsd – How to install or add sound card driver module

FreeBSD is getting more and more attention due to its stability and (well done) documentation. Geeks and nerds are getting their hands into installing FreeBSD onto their Desktop or Laptop. Some might ask “Eh ??? Why ain’t ya mentioning the servers? Is BSD.”. Sound card, sound card belongs to multimedia. It’s mostly meant for entertainment so it’s gonna stay on the “personal” thing. e.g. Personal Computer, laptop, notebook, rig, moo or whatever you called it. :p

Back to the topic. This post will try to demo on how to install sound card driver onto FreeBSD.

Add a comment

FreeBSD – How to upgrade the kernel or base system

The nature of FreeBSD is so rock-solid stable that some system administrator adopt the philosophy “if it ain’t broken, don’t fix it”, others, beg to differ. Upgrading & patching of servers should be diligently carry out so that security vulnerabilities are minimize to the least (who can be sure of their servers are 100% secure ???), introduce to new application features (which geek doesn’t like new stuff ???) & performance increase (meaner & leaner ). Patching can only be done to a certain level then it will need kernel and base system to compile and build the latest patches or upgrades.

Regular upgrade of the FreeBSD kernel and base system is a good way to follow the support schedule. It would mean that your server would have a longer life span in the production. Not because of some latest OS “GUI” release that demand higher RAM for the “processor hungry monster” lies beneath the OS “GUI” release. But rather, it fixes the bugs of the applications, gives you more new functions and make your hardware works harder & faster.

There are some hiccups to take note of. As with all OS upgrade, the will experience up time interruption (aka server down time) . Scenario such as :

:- The performance of the server have greatly draw by the upgrade process and impact the usual services the server runs. Thus the response time of the server fail to serve the users in time and affected the normal operation of the business.

:- The upgrades break the kernel or base system and the server fail to boot.

:- After the first boot up of the upgrade, the applications fail to compile properly and resulted the services fail to start.

:- The is your first FreeBSD upgrade and you can’t predict what would happen and hiccups just like to happen at these times. :p

All of the above can be avoided as long as the below points are observe :

plan and schedule the upgrade with adequate time so that even hiccups happen, there are ample time to solve it.
plan a trial server upgrade or mock run of the upgrade to anticipate what hiccups might happen and test the solutions. Use the server backup and restore to another hardware, virtual machine or sandbox to test the server upgrade. Drop down every step and retry it if time permits to minimize the hiccups.
The is the most important one. Always backup/restore perform a full system backup with no less then 1 day of difference. The shorter time of the difference between the backup and the upgrade, the faster and painless the restore process is. This also mean shorter down time.

Add a comment

Freebsd – Backup & restore for disaster recovery

Data are all around servers.. To name a few, file server, email server, LDAP server, web server, DNS server and these are just a few essential servers that make up part of IT section of your company. ERP, CRM, financial projection system, database server, accounting & payroll system are the example of business application. Imagine, what if “some” of these data are loss. It is also worth mentioning that data is so valuable to the company, that partial loss of it might lead to breaking your business continuity !!!

Most of the company operation are depending on these data in the server to make decisions. Data in the servers have never been so important.

Server data disaster recovery planing is a vital process in system administration. It directly shows how much the system administrators understand the importance their role in the business. Reason for data loss can be classified into 2 main categories, natural disaster and man made disaster. Natural disaster that causes data loss includes flood, earthquake, fire hazard and etc. Man made disaster (aka PBKC which denodes Problem Between Keyboard and Chair :p ) examples, hacking activities, accidental data deletion or over written and server maintenance e.g. patching, upgrades, developments, moving to a bigger size of hard disk & etc.

Disaster recovery involves planning, backup & restore. Planning will need identify which are the crucial data to backup and how frequent should it be backup. The next consideration will be what media should the data be save to. Generally, external hard disk (e.g USB) or network based storage (e.g. file server, ssh server, NAS, SAN) are the cheapest & fastest way to store the data. But if the data is to archive, it should go into media e.g. tape, CD, DVD and other optical media. Lastly, all planning and backup of the data should always test against restoration, or else why even plan to save it.

This post will concentrate on how to prepare for Server disaster recovery on a FreeBSD server. Do take note Database backup is not cover in this post as Database backup itself, have already a few strategy to look on.

There is an update for this post, please check out the updated post “FreeBSD – Backup and restore FreeBSD using Fixit CD“.

3 Comments

FreeBSD – Combine 2 (or more) NIC using network link aggregation and load balance (aka round robin)

Hard disk are getting bigger and bigger. Network interface card (NIC) and switch are getting cheaper and cheaper. It usually means more services can squeeze into a server. Combining multiple network interface into 1 big pipe would be a big plus for services that is bandwidth hungry. e.g. file server, email server & etc

Combining 2 or more network interface have a few advantages. One of them is load balancing. Load balancing enables the network interface card to share the load among the 2 or more network interface card defined. It serves as redundancy as well. But load balancing does not makes full use of the 2 or more network interface, it is meant to share network traffic load.

To fully utilize 2 or more network interface links, link aggregation should be used. Link aggregation is a method to combine 2 or more network interface to become a bigger pipe. It is also a way to combine 2 or more interface to use the same IP address. Using link aggregation can also create redundancy, if one of the link fails, the other links will take over.

This post is using FreeBSD as a server because FreeBSD have all the ports (software packages) you will need and server administration on it is made to ease systems administration daily task.Without further ado, below are the steps to configure 2 (or more) network interfaces to work as 1 big trunk or round robin :

Add a comment

How to check hard disk transfer speed or timing

Storage are getting cheaper and cheaper. Almost a year ago, a 250 GB 2.5″ portable hard disk would cost 120 bucks. But now, it only cost 100 bucks for a 500 GB hard disk. Size are getting bigger and bigger with the same monetary value but does the hard disk spins fast enough to fetch the big “gigabytes” in time? Of cause, given “enough” time, any rate of spin could fetch any size of data. Files are getting larger and larger, especially audio & video files. Fetching the files in an reasonable time is crucial.

Before we proceed to check out the command on how to check hard disk transfer speed or read timings, we will need to familiarize our self with hard disk naming convention. Here is a simple guide on how to identify hard disk naming convention in /dev (where device node are store) :

1 Comment

Mozilla Firefox – common keyboard shortcut keys

Firefox have all the bells & whistles to make our internet life happy. Tabs, plugins, portability and keyboard shortcuts. Firefox keyboard shortcuts make browsing addictive, especially to system administrator, which our hands are on the keyboard most of the time. We could use mouse to browse it but wouldn’t you think by keeping your hands on the keyboard would increase productivity?

Below are the list of keyboard shortcuts plus a few combination of mouse clicks which commonly used in Firefox. There are of cause other shortcuts available but this post only attempt to introduce you with the efficiency of using keyboard shortcuts (almost mouse-less) rather then trying to exhaust your brain memory in crunching the full list of keyboard shortcuts. You can print the below list of Firefox keyboard shortcut keys out and act as a Cheat Sheet. It can be useful in getting familiar initially using the keyboard shortcut keys. Here are the list :

Add a comment

WordPress – plugin upgrade requesting “Connection Information”

This common error happens normally after a WordPress version upgrade. Upon upgrade of plugins, which normally we click on the “upgrade automatically” link on the plugins page, it prompt for “connection information” (with another line of “To performed the requested action, connection information is required.“) with “hostname“, “username“, “password” & “Connection Type” required.

This issue is caused by certain wordpress essentials files or directory are not accessible by WordPress.

2 Comments

PostgreSQL – How to reset user name “postgres” password

postgresql

PostgreSQL is an open source RDBMS (Relational DataBase Management System) that is not only feature rich, fast and light but also easy to use. Its documentation available at its website is a superb way of learning as well. Browsing the documentation and you will find that its way of explaining is no “bullshit” approach, short and concise.

After the initial installation, one might forget to set the password after running the initial script to setup the database. After a while, naturally, we all forget the password. Below are the steps to reset the password for user name “postgres” :

2 Comments

Nokia E71 and E63 tips – shell or command line access using ssh (secure shell)

qtip-red

The Nokia E71 & E63 is a versatile phone for people that needs the business suite of application, e.g. email, messenger, documents & spreadsheet, camera and most importantly, the symbian platform. The symbian platform is widely used on mobile phones. Symbian’s platform also have a wide variety of applications.

For *NIX system administration, shell access to the command line (using ssh) of the servers are part of our life. Having to own Nokia E71 or E63 is one of the best thing as Putty is available on symbian platform. Putty is a symbian application that can connect to server using shell access or command line by ssh, which take advantage of the built-in QWERTY keyboard on Nokia E71 & E63. Putty also allow to use public key authentication, if the private key is installed on the phone or the memory card (mmc). It also allow to configure ssh (secure shell) client to connect to other ports then the default port 22.

Add a comment

Nagios – Error “Error: Could not open command file ‘/var/spool/nagios/rw/nagios.cmd’ for update”

After an upgrade of Nagios, Nagios re-schedule function for next service check is not working. The Nagios web interface complained “Error: Could not open command file ‘/var/spool/nagios/rw/nagios.cmd’ for update“. Its problem lies on the webserver was unable to access the file to update the schedule.

Add a comment

Please sponsor my coffee if you find my posts worth reading, thanks!

There is an update for this post, please check out the updated post “FreeBSD – Backup and restore FreeBSD using Fixit CD“.

Tags

Archives